DBX 1046 Quad Compressor / Limiter
17,087.72 ج.م
التقييم:
وصف المنتج : DBX 1046 Quad Compressor / Limiter
Quad Compressor Limiter
مواصفات المنتج : DBX 1046 Quad Compressor / Limiter
| IMD: | < 0.1% SMPTE |
|---|---|
| CMRR: | Typically >50 dB at 1 kHz |
| Noise: | < -96 dBu, unweighted, 22 kHz measurement bandwidth |
| infinity: | 1 |
| Bandwidth: | 20 Hz to 20 kHz, +0/-0.5 dB |
| I/O Meter: | 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu |
| Max Input: | > +22 dBu balanced or unbalanced |
| THD+Noise: | >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz |
| Dimensions: | 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm) |
| Input Type: | Electronically balanced/unbalanced, RF filtered |
| Max Output: | > +22 dBm balanced, > +20 dBm unbalanced |
| Switchable: | 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz |
| توافر: | نعم |
| Output Type: | Servo-balanced/unbalanced, RF filtered |
| Limiter Type: | PeakStopPlus® two-stage limiter |
| Bypass Switch: | Activates the direct input-to-output hard-wire bypass |
| Dynamic Range: | > 118 dB, unweighted |
| ST Link Switch: | Links channels in stereo pairs. Channels One and Three become the master channels |
| الماركه: | DBX |
| Input Impedance: | Balanced > 40 kOhm, unbalanced >20 kOhm |
| Limiter Stage 1: | PeakStop® brickwall limiter |
| Limiter Stage 2: | Predictive intelligent program limiter |
| Power Connector: | IEC receptacle |
| Shipping Weight: | 7.6 lbs. (3.5 kg) |
| Stereo Coupling: | True RMS Power Summing |
| I/O Meter Switch: | Switches between monitoring input and output levels on the Input/Output Level meter |
| Input Connectors: | XLR and 1/4" TRS (Pin 2 and tip hot) |
| Output Impedance: | Balanced 30 Ohm, unbalanced 15 Ohm |
| Function Switches: | LED indicator for each front-panel switch |
| Output Connectors: | XLR and 1/4" TRS (Pin 2 and tip hot) |
| OverEasy® Switch: | Activates the OverEasy compression function |
| Power Consumption: | 20 Watts |
| Frequency Response: | 0.35 Hz to 90kHz, +0/-3 dB |
| Gain Reduction Meter: | 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB |
| PeakStop™ Indicator: | 1 LED to indicate PeakStop™ limiting |
| Compressor Attack Time: | Program-dependent |
| Compressor Output Gain: | -20 to +20 dB |
| Interchannel Crosstalk: | < -80 dB 20Hz to 20 kHz |
| Operating Level Switch: | (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels |
| Compressor Release Time: | Program-dependent |
| Limiter Threshold Range: | 0 dBu to +24 dBu (off) |
| Compressor Threshold Range: | -40 dBu to +20 dBu |
| Output Transformer Options: | Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx |
| Limiter Stage 1 Attack Time: | Zero |
| Limiter Stage 2 Attack Time: | Program-dependent |
| Limiter Stage 1 Release Time: | Zero |
| Limiter Stage 2 Release Time: | Program-dependent |
| Compressor Threshold Characteristic: | Selectable OverEasy® or hard knee |
| Compressor Attack/Release Characteristic: | AutoDynamic™ |
مميزات وعيوب : DBX 1046 Quad Compressor / Limiter
لم يتم العثور على اي بيانات
مراجعات : DBX 1046 Quad Compressor / Limiter
لم يتم العثور على اي مراجعات.
القسم : كتب وترفيه
